T:: 01978 856555
F:: 01978 856655
email:: sales@scottaire.com
 
 
 
Featured Product

New Louvre Grill
Read more>


Featured Product

New Louvre Grill
Read more>


Featured Product

New Louvre Grill
Read more>


Featured Product

New Louvre Grill
Read more>

 

 

 

LAMINAR FLOW
PANELS

Laminar flow panels are designed primarily for use on cooling to give a low velocity air stream over the area immediately below the panel. The low velocity minimises induction and, if used with an air supply that has been filtered through absolute filters, is ideal for operating theatres and some clean room applications. It is strongly recommended that any
volume control is incorporated in the ductwork system, well upstream of the laminar flow panel, as the turbulence caused by a damper local to the panel will result in un-even flow across the whole face of the panel. If this is not possible, then it may be necessary to fit a perforated plate below the
spigot as shown on page 8.

STANDARD •
Code 0191. Laminar flow panel with a fixed core and no
flange for laying in to a `T´ bar system.
Code 0192. Laminar flow panel with a fixed core and
flange for surface mounting.

 
Standard Specification

SIZES
Code 0191. 1195mm x 595mm face size with a
350mm diameter spigot.
Code 0192. 1200mm x 600mm nominal opening size with a 350 diameter spigot.

CONSTRUCTION
Manufactured in sheet steel with a fixed perforated face. Code 0192 panels have an extruded aluminium flange.

FINISH
Powder coated to RAL 9010 satin.

FIXINGS
Either through the neck and duct connection if the ducting will support the weight of the panel. (Fixing type OF7) or by wires or rods through the fixing brackets, (Fixing type OF23).

PACKAGING
Each panel is packed in a tailor made carton.

TECHNICAL INFORMATION
for Codes 0191 and 0192 Laminar Flow Panels with 22.5% free area.

 

 
Optional Alternatives/Additions

Finishes
Any BS, RAL or N.C.S. colour. Code 0145. Please specify the colour reference.

QUADRANT DAMPER IN THE SPIGOT
Code 0483. If this is specified we would recommend that a perforated plate is fitted below the spigot.

PERFORATED SPIGOT BELOW THE PLATE
Code 0650.

HiNGED CORE FOR EASY CLEANING
Suffix H

Ordering Detail

• The code for the basic panel should have 13 digits.
See page 1.
• Please always give the length first and then the height.
• Add codes / suffix for alternatives and additions.

EXAMPLE:
A laminar flow panel for `T´ bar application, 1195 x 595mm over the face painted RAL 9010 matt would be coded 0191/01195/0595+0145 (RAL 9010 matt).

 

 
 

 

 

 

 
   
 
 
 
   
   
   
   
   
 
  SCOTTAIRE Davy Way, Llay Industrial Estate, Wrexham,LL12 0PG Tel: 01978 856555 Fax: 01978 856655 Email: sales@scottaire.com